-
src/sbbs3/putmsg.cpp
From
rswindell@VERT to
CVS commit on Wed Aug 15 08:38:00 2018
src/sbbs3 putmsg.cpp 1.34 1.35
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv27408
Modified Files:
putmsg.cpp
Log Message:
This is a bit of a hack for Nelgin, who noticed that novice menu mode
would not always auto-redisplay menu files when the user hits 'Q' (or 'N'
or Ctrl-C) at auto-pause prompts:
When displaying a "message" (e.g. file), if the console abort flag is set before a single line has been displayed, clear the abort flag. This most
likely means a pause (hit a key) prompt was automatically displayed due to
a clear screen code in the message/file and the user hit 'Q' or 'N' or
Ctrl-C at the prompt. In this special case, don't treat that as an
"abort message" command and keep displaying the message/file.
Once one or more lines in the message/file have been displayed, then the behavior is the same as before: a console abort (even as a result of an auto-pause prompt key) will stop the display of the current message/file.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Wed Oct 3 17:03:00 2018
src/sbbs3 putmsg.cpp 1.35 1.36
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv6325
Modified Files:
putmsg.cpp
Log Message:
Updated some very obsolete comments.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Sun Oct 14 17:16:00 2018
src/sbbs3 putmsg.cpp 1.37 1.38
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv22404
Modified Files:
putmsg.cpp
Log Message:
@eof@ (all-caps) is now another way to insert a premature EOF marker for a display file.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Mon Oct 15 14:17:00 2018
src/sbbs3 putmsg.cpp 1.38 1.39
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv19954
Modified Files:
putmsg.cpp
Log Message:
If the Ctrl-A" code contains an empty/bogus filename, don't try to display
it. This Ctrl-A code is dubious and perhaps should just be removed.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Thu Oct 25 15:04:00 2018
src/sbbs3 putmsg.cpp 1.40 1.41
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv10622
Modified Files:
putmsg.cpp
Log Message:
New @-code: WRAPOFF - used to mark the end of a word-wrapped section in a display/menu file.
Also, the WORDWRAP @-code may now appear anywhere in the file and multiple times in the file (to mark multiple word-wrapped blocks of text).
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Fri Dec 14 15:50:00 2018
src/sbbs3 putmsg.cpp 1.42 1.43
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv11590
Modified Files:
putmsg.cpp
Log Message:
Fix bug when the @center@ code when displaying files that contain Unix-style line endings (sole-LF) instead of CR/LF line endings.
Thanks to Mark Lewis (wkitty42) for the bug report!
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Thu Apr 25 12:42:15 2019
src/sbbs3 putmsg.cpp 1.45 1.46
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/home/rswindell/sbbs/src/sbbs3
Modified Files:
putmsg.cpp
Log Message:
Fix for PCBoard @Xxx code parsing:
@X00 saves the current color and @XFF restores that saved color.
Thanks to NuSkooler for the PCBoard manual, which is pretty good.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Thu Apr 25 13:25:39 2019
src/sbbs3 putmsg.cpp 1.46 1.47
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv22919
Modified Files:
putmsg.cpp
Log Message:
Added support for PCBoard @ macros QOFF and QON:
QOFF - user cannot abort the display of the file
QON - user can abort the display of the file
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Wed Jul 10 10:41:38 2019
src/sbbs3 putmsg.cpp 1.50 1.51
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv31168
Modified Files:
putmsg.cpp
Log Message:
Calculate string length *before* the initial parsing of the WORDWRAP/WRAPOFF codes.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Thu Jul 25 18:23:58 2019
src/sbbs3 putmsg.cpp 1.52 1.53
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv25006
Modified Files:
putmsg.cpp
Log Message:
Ctrl-A" is a potentially dangerous Ctrl-A code, so only support it when
@-codes are also supported (i.e. displaying sysop-controlled content).
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Mon Jul 29 11:38:02 2019
src/sbbs3 putmsg.cpp 1.54 1.55
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv23720
Modified Files:
putmsg.cpp
Log Message:
Strip "ZHEX" ('B') from ZDLE/ZHEX combinations which trigger auto-ZMODEM transfers. These should *not* be included in message text.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Mon Aug 5 00:14:35 2019
src/sbbs3 putmsg.cpp 1.57 1.58
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv23795
Modified Files:
putmsg.cpp
Log Message:
Only restore the previously current output_rate if it was changed in the msg.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Sun Apr 5 15:49:34 2020
src/sbbs3 putmsg.cpp 1.58 1.59
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv19396
Modified Files:
putmsg.cpp
Log Message:
The hack for Nelgin created back in rev 1.35 (Aug-15-2018) was:
- incomplete, it didn't account for the CLEAR @-code which is only handled here - caused side-effects in that any Baja PRINT function call with a single line
that contained any ^A or @-codes would reset the console abort indication
flag (SS_ABORT).
Observed: hitting Ctrl-C at while executing the yesnobar.bin or noyesbar.bin
would leave "Yes Yes No" on the console, for example.
Solution: use the tos (top-of-screen) state before/after the call to ctrl_a()
or show_atcode() to determine if the reset-abort hack should be applied.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Sat May 2 21:29:00 2020
src/sbbs3 putmsg.cpp 1.60 1.61
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv29188
Modified Files:
putmsg.cpp
Log Message:
After displaying a native PETSCII (.seq) file, reset the character set to Upper/Lower for compatibility with the rest of the BBS (some PETSCII Art files change the character set to Upper/Graphics).
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
rswindell@VERT to
CVS commit on Fri May 8 14:52:41 2020
src/sbbs3 putmsg.cpp 1.63 1.64
Update of /cvsroot/sbbs/src/sbbs3
In directory cvs:/tmp/cvs-serv6598
Modified Files:
putmsg.cpp
Log Message:
non-PETSCII (.seq) display files are assumed to retain their attributes between lines, but PETSCII terminals reset the inverse attribute upon CR's, so restore the attribute if it changes unexpectedly. We could make this check only when outputting CR's (rather than all characters), if it's a problem later.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
Rob Swindell@VERT to
Git commit to sbbs/master on Mon Sep 7 15:03:45 2020
-
From
Rob Swindell@VERT to
Git commit to sbbs/master on Mon Sep 7 16:08:02 2020
-
From
Rob Swindell@VERT to
Git commit to sbbs/master on Thu Oct 8 16:12:37 2020
https://gitlab.synchro.net/sbbs/sbbs/-/commit/9919c23e8e52f5b7bb9a79f4
Modified Files:
src/sbbs3/putmsg.cpp
Log Message:
Don't pass-through ANSI Device Attributes (DA) requests
putmsg(), used to display messages and display/menu files, will no longer pass-through the ANSI sequence ESC[c (found in some corrupted ANSI posts to fsxNet->FSX_BOT echo) to the client terminal since this will stimulate a (unwanted) response from the client.
I do wonder if the outchar_esc value check should be == here instead of >=, but I'm not familiar with the string and SOS states. I wonder if any display files sent from the BBS would ever include those sequences.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
Hatton@VERT/THRCORN to
Rob Swindell on Thu Oct 8 20:31:00 2020
Rob Swindell wrote to Git commit to sbbs/master <=-
Modified Files:
src/sbbs3/putmsg.cpp
Log Message:
Don't pass-through ANSI Device Attributes (DA) requests
putmsg(), used to display messages and display/menu files, will no
longer pass-through the ANSI sequence ESC[c (found in some corrupted
ANSI posts to fsxNet->FSX_BOT echo) to the client terminal since this
will stimulate a (unwanted) response from the client.
Thank you!
Hatton
... DalekDOS v(overflow): (I)Obey (V)ision impaired (E)xterminate
--- MultiMail/Win v0.52
þ Synchronet þ Three Corners and Beyond!
http://3corners.us
-
From
Digital Man@VERT to
Hatton on Thu Oct 8 18:18:21 2020
Re: Re: src/sbbs3/putmsg.cpp
By: Hatton to Rob Swindell on Fri Oct 09 2020 12:31 am
Rob Swindell wrote to Git commit to sbbs/master <=-
Modified Files:
src/sbbs3/putmsg.cpp
Log Message:
Don't pass-through ANSI Device Attributes (DA) requests
putmsg(), used to display messages and display/menu files, will no longer pass-through the ANSI sequence ESC[c (found in some corrupted ANSI posts to fsxNet->FSX_BOT echo) to the client terminal since this will stimulate a (unwanted) response from the client.
Thank you!
Sure. There are likely more sequences we might want to filter out of ANSI-encoded messages (or whitelist only the ones we *do* want to pass-through), but this'll work for now.
digital man
Synchronet "Real Fact" #95:
Synchronet v3.15b was released in October of 2011 (5 years after v3.14a). Norco, CA WX: 62.8øF, 84.0% humidity, 3 mph ESE wind, 0.00 inches rain/24hrs
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
Rob Swindell@VERT to
Git commit to sbbs/master on Sun Nov 1 21:30:29 2020
https://gitlab.synchro.net/sbbs/sbbs/-/commit/93dc3f128816d1ddb24b6cab
Modified Files:
src/sbbs3/putmsg.cpp
Log Message:
Allow punctuation characters on either side of the markup tags
So you can do stuff (*like this*).
Also, we don't need to heavily scrutinize the closing tag when we come upon it because we already determined it was valid before we accepted the opening tag/character.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
Rob Swindell@VERT to
Git commit to sbbs/master on Sun Nov 8 08:15:19 2020
-
From
Rob Swindell@VERT to
Git commit to sbbs/master on Sun Nov 8 10:57:40 2020
-
From
Rob Swindell@VERT to
Git commit to main/sbbs/master on Sat Jan 22 20:08:25 2022
https://gitlab.synchro.net/main/sbbs/-/commit/09a32c0dad9f896893f2845b
Modified Files:
src/sbbs3/putmsg.cpp
Log Message:
Basic PETSCII output column/line counting in putmsg()
When printing a PETSCII Sequence (.seq) file, count the lines/rows and columns similar to how we would if we were using outchar() (but we don't, we use the lower-level outcom() to bypass any translations).
This is related to issue #325:
PETSCII seq files seem to display just fine, the problem I saw was with the auto-pausing (e.g. before a screen-clear) after displaying them.
---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
-
From
Rob Swindell@VERT to
Git commit to main/sbbs/master on Sun Jan 23 07:29:13 2022
-
From
Rob Swindell@VERT to
Git commit to main/sbbs/master on Sun Jan 23 07:48:34 2022
-
From
Rob Swindell@VERT to
Git commit to main/sbbs/master on Wed Mar 9 19:24:49 2022
-
From
Rob Swindell (on Debian Linux)@VERT to
Git commit to main/sbbs/master on Sun Mar 12 17:36:56 2023
-
From
Rob Swindell (in GitKraken)@VERT to
Git commit to main/sbbs/master on Sun Mar 12 18:24:18 2023
-
From
Rob Swindell (in GitKraken)@VERT to
Git commit to main/sbbs/master on Mon Mar 13 18:31:32 2023